I thought I would post this info due to the regular questions regarding water pressure. I just found this at Camping World for $49.



I like this product because the pressure is adjustable and has an incorporated gauge. The pressure is adjustable from 10 to 80 pounds. I was never satisfied with the standard 40 pound screw on type as it was never enough to get decent pressure in the shower. I set mine to 65 pounds and it is working great.

Sarge

The shortcoming with previous Valtera regulators has always been a low flow rate, typically about 2 gal/min. That's not much for a shower. How does this one do?

You can buy a whole house size regulator for about that price and get 10+ ga/min (more than the rest of the RV plumbing can handle). Bigger and heavier, though.

I agree Gary, but the key word here is adjustable. With their previous regulators they were preset at 45 psi, which is not much. I set mine at 60-65 psi and the pressure is great. The park I am in at the present runs average pressure of 80 to 100 psi. I looked at the house regulators as well, but as you said, too big, too heavy, and too much plumbing required.

Some RV's have a tremendious amount of room in the fresh water bay, but I don't. This was a good alternative for less money, and less space required. And although I could have easily plumbed in the Watts regulator, some folks dont want to mess with the extra parts. Just screw on and adjust the pressure screw.

Sarge

Is 65 lbs. safe? Most manufacturers recommend less. I'd love to increase my pressure if it's safe to do so, the pressure at my galley sink is terrible.

Craig

That's why the pre-set regulators are set at 45#.

In a recent post by a member that asked that question at the Winnie factory, a tech told him that Winnie tests their plumbing systems to at least 80 psi. The tech felt very comfortable to allow 60 psi at the water inlet.

I am sure that most modern RV's are using the same modern materials to assemble their plumbing systems and therefore would be safe as well.

quote:

too big, too heavy, and too much plumbing required

A little bigger yes, heavier maybe, but what plumbing?? My Watts just has a hose-bib adapter on each end.

Do I understand you to say that you plumbed your pressure regulator into your water compartment?? I put mine on the hydrant so the hose is not dealing with excessive pressure either. One place we stay once or twice a year has water pressure running apx 100-110 psi!!!

The regulator does not hook up in the water bay, it belongs out at the post to protect the hose as well as the coach plumbing.

I built up one from a large Watts, a couple of short brass nipples and the male and female hose adapters.

Ken

Like the others, I have a house type regulator with hose thread adapters on either end. Not much plumbing there.

Oh, and I run it at 62 psi. Perfectly fine for RV plumbing in this day and age. The RVIA requires that the plumbing be tested at 80 psi.

If the whole house regulator is working for you that's great! I priced them in my neck of the woods (So. Cal) and they were priced at most of a $100 dollar bill. And the post option does not work for me. I don't have the faith in human nature that someone wouldn't come along and decide that the hunk of brass would wind up in their recycle bag.

I am just presenting an option, not the answer to everyones water pressure problems. After all, it's your own RV, you get to make your own decisions......