I just finished the 50 hour oil and filter change on my generator. Now, I am about to do my first chassis lube on a 40QSP Bus on a Spartan chassis. Does anyone have a chart showing the grease zerk locations, or at least a count of points?

I also just found this forum. I like it!!


Richard

That should be in your manuals. Don't know what Spartan chassis you have, but I have a copy of mine, 2 pages (one list & one picture) on my web site at http://www.pjrider.com . Go to "RV Travels" on the left and you'll find a link to "Spartan Mountain Master GT Chassis Maintenance Guide" a short distance down the page.

I need a lube point chart for a 43" K2 mountain master as it is not in the manual. Can anyone help?

If TRVN was up and running I would provide you with a link to Cruzer's service schedule on his 42 MM chassis. The K2 and the MM are not the same chassis. The 43 Bus is on the MM chassis. The Z is the only TMH coach on the K2 chassis.

Per Cruzer - See if this helps
Grease Carrier Bearings (4 zerks)
Grease Kingpin Knuckles (4 zerks)
Grease Drag Link (2 zerks)
Grease Crank Rod (2 zerks)
Grease Tie Rod Ends (4 zerks)
Grease Slack Adjusters and Brake Cam Bushing (1 zerk each)
Grease Driveshaft (2 zerks per U joint and 1 per slip joint)
Grease Steering Column Shaft (1 U joint and 1 slip joint)
Grease Steering Gear (1 zerk)

This message has been edited. Last edited by: Rob&Sue,