|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
|
Can someone give me a little education on how this system exactly works. I would also like to know what the steps are to change this filter/water separator. Thanks.
P.S. I have this on my coach. 1997 39' Monaco Dynasty 325hp |
||
|
|
|
Yours looks a little different than mine. Mine has a metal bowl on the bottom of the filter element with a electrical plug for the water sensor and a 1/4" tubing connection for water purging. The control panel has two buttons and lights. With the ignition key "on" if you push the purge button the filter system go thru a purge cycle and pump fuel thru the filters to purge air. I do this twice when changing filters and have no problems when restarting the engine.
Beaver Marquis Trailblazer Toad |
|||
|
|
"Monaco Owners Forum Member" |
Andy M, can you tell us more about your motorhome? (year, model, etc) It's not included in your profile or your signature. Thanks! Mic (& Rick the FishBum) 2008 Cayman XL 35SBD Diesel Cummins ISB 340 HP, Allison 6 Spd 2008 Honda CR-V EX Roadmaster Sterling Tow Bar w/ US Gear Unified Brake TTN, GS, FMCA Rick & Mic's Gone Fishin! Blog |
|||
|
|
|
1997 Dynasty 325hp
1997 39' Monaco Dynasty 325hp |
|||
|
|
"Moderator" |
Andy M..I am going to link this down to the Cummins Forum. You might get a better response from the "iRV2 Tech Heads"
Good Luck! MM |
|||
|
|
" " |
Leo 06 Dutch Star 4023 Cummins ISL 400 Spartan MM GT |
|||
|
|
|
Perfect, thank you.
Now I will try to get a copy sent either by email or faxed. 1997 39' Monaco Dynasty 325hp |
|||
|
|
|
Andy
Your unit is model 90s1230c The replacment filter 200200 is no longer available. Winn/Racor has an upgrade kit number RK12963 is available from [EMAIL]www.rvchassisparts.com[/EMAIL] Part number is 0340-hh3-001($69) It has an upgraded water sensor and a larger capacity metal bowl. After upgrade the new filter will be number S3230P The see thru pre-filter is number 300200, it is however washable. If you need service instructions you can e-mail me at patsmith@dunnhardware.com and I can fax a copy. Pat P.S it's been over 3 years since the upgrade so I would do it right a way, it takes about 10 min. |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

