Do to scheduling conflicts Mike Bronzini and Steve Brazel will NOT make the National IRV2 Rally in Branson. Mike has asked me to fill in for him and Steve. Mighty big set of shoes to fill, I hope I am up to the task.

I will be doing the programming at the rally. Normally Steve would would do both the upgrade or update in one setting. The UltraPower UPGRADE will be done a bit differently as I will have to read/save the ECM, transmit it to Brazel's, receive it back and write the update to the ECM. Remember, the ECM update is customized to each module based on the Vin # and the calibration codes set by GM for that Vin #. If you want to see the GM code numbers check this link GM Vin# Codes. Note-You must use IE to access this site.

If you need the UltraPower UPDATE the procedure will be the same... except Brazels will just update the various tables and send it back.

Although this is kinda early I am starting a list of who wants what. I will have as many of Brazels products available as I can. But, I will not be able to any installs during the rally do to time constraints....

UltraPower
ECM Upgrade - $650 - 1st Time
1.Rick Taube - 2003 Southwind 36t
2.
3.

ECM Update - FREE - Previously Installed
1.Roger Moore - Newmar--03 KS-3740
2.Ted Trostle - 04 Winnebago Sightseer, 35N
3.

This message has been edited. Last edited by: oemtech,

Dale,
Please add our MH for the ECM upgrade.
Thanks, Rick

Dale, Will you be able to do my ultraPower at Branson? Your notice is confusing to me.

Lynn Sims
2002 Winney Adventurer, gas

Yes Lynn I will be doing doing the UltraPower upgrade (never had it done) or update (currently have it installed).

quote:

Originally posted by oemtech:
Do to scheduling conflicts Mike Bronzini and Steve Brazel will NOT make the National IRV2 Rally in Branson. Mike has asked me to fill in for him and Steve. Mighty big set of shoes to fill, I hope I am up to the task.

I will be doing the programming at the rally. Normally Steve would would do both the upgrade or update in one setting. The UltraPower UPGRADE will be done a bit differently as I will have to read/save the ECM, transmit it to Brazel's, receive it back and write the update to the ECM. Remember, the ECM update is customized to each module based on the Vin # and the calibration codes set by GM for that Vin #. If you want to see the GM code numbers check this link GM Vin# Codes. Note-You must use IE to access this site.

If you need the UltraPower UPDATE the procedure will be the same... except Brazels will just update the various tables and send it back.

Although this is kinda early I am starting a list of who wants what. I will have as many of Brazels products available as I can. But, I will not be able to any installs during the rally do to time constraints....

UltraPower
ECM Upgrade
1.Rick Taube - 2003 Southwind 36t
2.Lynn Sims - 2002 Winney Adventurer
3.

ECM Update
1.
2.

UltraPower CAI
1.
2.

UltraTrac Trac Bars
Workhorse - Rear
1.
2.

Workhorse - Front
1.
2.

Taylor Plug Wires
1.
2.

AC 41-932 Spark Plugs
1.
2.

Koni FSD Shocks
1.
2.

Is the upgrade for 1st timers and the update for those that have had it done in the past??
What is the cost?

This is both... The Rally price is $650 with a Liftime warranty.

Dale I thought updates were part of the original install no charge as long as original owner.

Roger,

He is talking about new customers,the UltraPower updates are still free.

quote:

UltraPower
ECM Upgrade - $650 - 1st Time

ECM Update - FREE - Previously Installed

Roger,

The difference is UPGRADE versus UPDATE. You would be on the Update list if you need/want it.

Add me to update list. Does anyone have what the update is? Is it more than the ping issue?
Thanks oh great one with the POWER.