As requested, here are a bunch of pictures of the 24P View interior in this gallery link.

Really nice layout but who gets to sleep in the top bunk bed ?

Lichtsinn Motors, order a 24A View, call me, and lets make a trade!!!!!

Thanks John for the good pics!

There was not a 24A to look at unfortunately - it must not be out yet. I'll ask around about it.

Im very appreciative of the pictures John.

No...the 24a will debut in December, and will have a full length slide....also won't have the booth dinette, and will have a Euro Chair....very nice setup....might have a low CCC number...will check that out though.

John~ Were those three numbers, 111,*** before the comma in the MSRP?

quote:

Originally posted by Gary CA:
John~ Were those three numbers, 111,*** before the comma in the MSRP?

$113,365!!

By the way - I did ask around about the 24A and was told it is scheduled for production in November. Apparently there is only a prototype of the 24A so I was unsuccessful in my quest for interior pictures. I will try to have some in the gallery as soon as possible though.

A piece of the story some may not know...

The '08 Sprinter chassis gained 830 pounds of GVW (10,200 to 11,030). The chassis itself is a bit heavier, but carryover floorplans ('07 to '08) gained nearly 800 pounds of CCC.

The '07 slide models had pretty low CCC. My guess is the 24A uses up some of that extra GVW. The comparable Fleetwood Pulse models (with large slides) have CCC in the 200 pound neighborhood.

[My father-in-law's '08 24B (bunks, non-slide) has a CCC of 1075 pounds. The '07 must have had a very low CCC as will the 24P which adds a slide.]